Loading ...
Loading ...
Loading ...
Command Descriptions
85
value is "Permit".
Rate Limiter ID
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values
1
through
16
. The default value is "Disabled".
Port Redirect
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default value is
"Disabled".
Mirror Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
Loggig Specify the logging operation of this port. Notice that the logging message doesn't
include the 4 bytes CRC. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled". Note: The logging feature only works when the
packet length is less than 1518(without VLAN tags) and the System Log memory
size and logging rate is limited.
Shutdown Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
Note: The shutdown feature only works when the packet length is less than
1518(without VLAN tags).
State Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL user
module.
Disabled: To close ports by changing the volatile port configuration of the ACL user
module.
The default value is "Enabled".
Counter Counts the number of frames that match this ACE.
Buttons
Click to save changes.
Click to undo any changes made locally and revert to previously saved values.
Loading ...
Loading ...
Loading ...