Loading ...
Loading ...
Loading ...
7
Built-in 4.9 Cu. Ft. Wine Cooler
www.insigniaproducts.com
• Locate the cooler away from direct sunlight and sources of heat (stove, heater,
radiator, and so on). Direct sunlight may affect the acrylic coating and heat sources
may increase electrical consumption. Ambient temperature below 55° F (12.8° C) or
above 90° F (32° C) will hinder the performance of this cooler. This cooler is not
designed for use in a garage or any other outside installation.
• Avoid locating the cooler in moist areas.
• This unit is not designed to be installed in an RV or used with an inverter.
• Do not stack your cooler.
Building in your wine cooler
The cutout dimensions shown in the following graphic allow the door to swing open and
provides access to the pull-out shelves when installed as a built-in unit.
If you are installing the unit between frameless cabinets, a ½" wide filler strip or side
panel may be needed on the hinge side. The filler strip will act as a spacer between the
appliance case and the adjacent cabinet door swing. The width of the opening must
include the filler panels. The door should extend at least one inch beyond the
surrounding cabinets.
Power outlet
24-1/2” (62.2 cm)
(including door)
6” (15.2 cm) max.
34-1/2” to 35”
(87.6 to 88.9 cm)
24” (61 cm) min.
20-4/5” (52.8 cm) Cabinet only
34-2/5” (87.4 cm)
23-2/5”
(59.4 cm)
24” (61 cm)
min.
Loading ...
Loading ...
Loading ...