Loading ...
Loading ...
Loading ...
12
NS-WB44SS8
www.insigniaproducts.com
Lower zone
• There are two full-depth wine shelves in the lower zone. Each shelf can hold up to
eight bottles, with the necks of the bottles alternating front to back.
• There is one wood shelf at the bottom of the lower zone. A total of 12 bottles can be
stored on this shelf, in two layers, with six bottles in each layer.
Arranging bottles for maximum storage
If you will only be storing smaller bottles, we suggest that you use the “All small bottles”
layout shown above.
If you will be storing a combination of large and small bottles, the “Large and small
bottles” layout suggested above may help. Due to the wide range of bottle sizes
available, we suggest that you begin by placing the large bottles (over 2 31/32") on the
top shelf, then place the smaller bottles (2 31/32" or smaller) in the available space
remaining. The large bottles can be placed on the second shelf. If you need to
accommodate additional larger bottles, we suggest removing the third shelf, then begin
by placing the smaller bottles on the fourth shelf, then place the larger bottles on top of
them. The bottom shelf should be reserved for smaller bottles only. The following
information should help you plan your storage layout:
Shelf spacing from top to bottom
• Top to first shelf - 4 1/3" (11 cm)
• Between first and second shelf - 4.5" (11.4 cm)
• Between the control panel and the third shelf - 3 1/5" (8.18 cm)
• Between the third and fourth shelves - 2 31/32" (7.55 cm)
• Between the fourth and fifth shelves - 6 2/32" (15.4 cm)
Note: The compressor takes up some space above the 5th shelf, so some bottles may
not fit.
All small bottles (2 31/32" or smaller) Large (over 2 31/32") and small bottles
Loading ...
Loading ...
Loading ...