Loading ...
Loading ...
Loading ...
10
NS-WB44SS8
www.insigniaproducts.com
Grounding requirement
This cooler must be grounded. This cooler is equipped with a cord having a grounding
wire with a grounding plug. The plug must be inserted into an outlet that is properly
installed and grounded.
Consult a qualified electrician or service person if the grounding instructions are not
completely understood, or if doubt exists as to whether the cooler is properly grounded.
Connecting to power
• Plug the appliance into a dedicated, properly installed grounded wall outlet. This
appliance should be operated on a separate electrical circuit from other operating
appliances. Do not under any circumstances cut or remove the third (ground) prong
from the power cord. Any questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized service center.
• Plug in and run your cooler for three to four hours before making any temperature
adjustments and before adding wine. This allows your cooler to reach a stable
temperature.
• Do not use an extension cord with this cooler. If the power cord is too short, have a
qualified electrician install an outlet near the cooler. Use of an extension cord can
negatively affect the cooler’s performance.
Using your wine cooler
Turning on your cooler
Press the button to turn your cooler on. The display screen and indicators blink for
three seconds and an audible beep will be heard, then the compressor starts working.
You can manually set your unit to “Standby” mode by touching the button for
approximately three seconds, provided that the control keys are unlocked and no other
setting is in effect (the display is not blinking). Repeating this action restarts the unit.
Setting the temperature
The screen display always shows the set temperature. When adjusting the temperature,
the temperature display blinks to indicate that the temperature is being adjusted.
The temperature in the upper and lower zones can be set independently by touching the
or buttons for the selected zone. The temperature range of both zones can be set
between 39° F to 64° F (4° C to 18° C).
WARNINGS:
• Improper use of the grounding plug can result in a risk of electric shock.
• Do not, under any circumstances, cut or remove the third ground prong from the
supplied power cord.
CAUTION: This unit is not designed to be installed in an RV or used with an inverter.
Notes:
• Check your local power source. This cooler requires a 110V-120V, 60 Hz power
supply.
• Use a receptacle that accepts the grounding prong. The power cord is equipped
with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding)
wall outlet to minimize the possibility of electric shock hazard from this cooler.
Note: The temperature may vary ± 5°
F (± 3° C) from the temperature set.
Loading ...
Loading ...
Loading ...