Loading ...
Loading ...
Loading ...
STEP 2: ADJUSTING THE DEADBOLT
Deadbolt at 2-⅜" (60mm)
II. 2 ⅜" (60mm) ---> 2 ¾" (70mm)
(Note: Wear gloves during
adjustment to prevent pinching
your hands)
A
B
E
D
Latch
Deadbolt Body
Deadbolt Body
31 2
2. Twist deadbolt body (B)
clockwise to 45-degree angle,
then
1. Make sure the bolt (A) is
plugged in and the crank (D)
is positioned at the end of the
deadbolt body (B);
3. Pull deadbolt body (B) about
½" away from the bolt (A).
Hold crank (D) then twist (B)
counter-clockwise until it snaps
on 2 ¾" (E).
The hole will snap on 2 ¾"
bumper (C) with a twist.
Make sure the crank (D) stays on this
position during the adjustment process.
This part will unsnap with a twist.
Loading ...
Loading ...
Loading ...