Loading ...
Loading ...
Loading ...
First install 3 of the 4 batteries. Before installing the
last battery, press and hold the PROGRAM button
while installing the last battery until you hear
a beep from Lockly.
Lockly will then perform a self check and the
keypad
screen will start to initiate. This self check will
automatically
determine and set your door lock to
a left open or right open door.
STEP 8: INSTALLING BATTERIES
The self-check process is very important step to ensure the installation is done properly.
After the lock finished the self-check, manually lock and and unlock your door by using
the thumb turn and the key to make sure the deadbolt moves smoothly. If you feel that
there is a tight tension while you are turning, it means that the lock may have not been
installed straight. Go back to Step 2 and re-install the lock.
To check if your lock was installed correctly, manually unlock your door by using the
thumb turn, then brush your hand across the screen on the outside. Your lock should lock
the dead bolt. If your lock automatically unlocks after it has been locked, it means that
your lock was installed incorrectly - proceed to Step 2 to make sure your lock was
installed with the dead bolt extended and the torque blade was inserted vertically while
the dead bolt was extended.
+
-
+
-
+
-
+
-
Loading ...
Loading ...
Loading ...