Loading ...
Loading ...
Loading ...
STEP 2: ADJUSTING THE DEADBOLT
If NOT, adjust deadbolt as shown below.
If the hole on the "+" is centered on the drilled
door hole, no adjustment is needed.
I. 2 ¾"(70mm) ---> 2 ⅜" (60mm)
(Note: Wear gloves during
adjustment to prevent pinching
your hands)
2. While holding the bolt (A),
twist deadbolt body (B) to
45-degree angle clockwise;
and
1. Make sure the bolt (A) is
plugged in and hold it tight
with left thumb;
3. Push deadbolt body (B)
towards the bolt (A) while still
holding the bolt tip tightly with
your left thumb. Twist deadbolt
body (B) counter-clockwise
until it snaps on 2 ¾" (C).
A
B
Deadbolt Body
Latch
The hole will snap on 2 ¾"
bumper (C) with a twist.
This part will unsnap with a twist.
1 2
Deadbolt at 2-¾" (70mm)
(shipping default status)
C
Deadbolt Body
3
Loading ...
Loading ...
Loading ...