Loading ...
Loading ...
Loading ...
-...
Cutting Attachment
Shield
Shield Mount
Cutting Attachment
................... Fig. 6 ........
2. Place a he× lock nut intoone of the three recessed
holes on the top of the cutting attachment shield
(Fig 7.
Cutting Attachment
Shield
........... Fig. 5 ......
INSTALLING THE CUTTING ATTACHMENT
SHIELD
Use the following instructionsif the cutting attachment
shield on your unit is not installed.
[ ,_ WARNING: Never operate the trimmer [
without the cutting attachment shield in
place to prevent serious personal injury.
1.
Slide the cutting attachment shield into the shield
mount on the cutting attachment, Align the screw
holes in the shieJd with the holes in the cutting
attachment (Fig. 6),
.................. Fig. 7 ....................
3. Install a screw intothe hole from the bottom of the
cutting attachment shield and screw it into the nut
installed in step #2 (Fig 8). Do not tighten.
4. Repeat steps 2 and 3 until al_three screws have
been started, then tighten securely.
__ Screws
........ Fig, 8 ..............
9
Loading ...
Loading ...
Loading ...