Loading ...
Loading ...
Loading ...
INFORMATION CODES
Information codes are displayed to help you better understand what is occurring with your dishwasher.
If occured the below codes, you should select the Cancle&Drain option and follow the below instruction.
Thermistor error
Heater error
Heater error
}_ _ Low water level error
Half load function error
Water supply error
Functional error. Insert detergent without loading
dishes, and run a cycle.
Ifthe problem continues, disconnect the circuit
breaker and contact a service center.
Check whether the water supply line is
connected correctly.
Check whether the water supply valve is closed,
the water supply is suspended or the water
inlet valve or line is frozen or clogged by foreign
particles.
Ifthe problem continues, disconnect the circuit
breaker and contact a service center.
The temperature of the supplied Check the temperature of the supplied water. If
water is too high it is higher than 176 °F(80 °C),a functional error
J
may occur with the dishwasher.
Drain error Check whether the drain hose is clogged or
folded. Ifthe problem continues, disconnect the
circuit breaker and contact a service center.
Water level error (over-level) Functional error. Disconnect the circuit breaker
and contact a service center.
Leakage
Key pressed
Functional error. Close the water supply valve
and disconnect the circuit breaker and contact a
service center.
Functional error. Turn off the dishwasher and Use
a soft damp cloth on the control panel. (Refer to
the cleaning section.)
Ifthe problem continues, disconnect the circuit
breaker and contact a service center.
For any codes not listed above, call 1-800-SAMSUNG(726-7864)
troubleshooting 25
Loading ...
Loading ...
Loading ...