Loading ...
Loading ...
Loading ...
CHECK THESE POINTS IF YOUR DISHWASHER...
Will not start.
Is taking too long with an
operation (maybe cycle).
Has a bad odor.
Has water remaining
after the cycle has
finished.
Has food particles
remaining on dishes.
Does not dry dishes well.
The door is not closed completely.
No cycle is selected.
The power cable is not connected.
The water supply does not work.
A circuit is tripped or a fuse is open.
Cold water is being supplied.
There is water left over from the last
cycle.
The drain hose is folded or clogged.
An inappropriate cycle has been
selected.
Check that the door is latched and
closed completely.
Select a cycle.
Connect the power cable.
Check that the water supply valve is
open.
Reset the circuit breaker or replace
the fuse.
Check that the water supply line is
connected to a hot water supply.
(Additional time is required to heat
cold water.)
Insert detergent without loading
dishes, and run the Quick cycle to
clean the dishwasher.
Straighten the hose.
Select a cycle according to the
number and soil level of the dishes,
as directed inthis manual.
The water temperature is low. Connect the water supply line to a
hot water supply.
No dishwashing detergent is being Use a automatic dishwasher
used. detergent.
The pressure of the supplied water The proper pressure of the supplied
is low. water should be 20-120 psi
(140-830 kPa).
A nozzle is clogged. Clean the nozzle.
The dishes are improperly loaded.
There is no rinse aid in the dispenser.
The temperature of the water is low
when the dishwasher is running.
Rearrange the dishes so they do not
interfere with the nozzle rotation and
the dispenser operation.
Check the dispenser and add rinse
aid.
Use rinse aid with the Sanitize
with Extra Dry option.
troubleshooting 23
Loading ...
Loading ...
Loading ...