Loading ...
Loading ...
Loading ...
trotJb shoot na
Has spots and film left
on dishes.
Is too noisy.
The water temperature is low. For best performance, the
temperature of the supplied water
should be 120 °F (49 °C).
Supply the appropriate amount of
automatic dishwasher detergent.
Load only an appropriate number of
dishes.
The detergent amount is
inappropriate.
Too many dishes have been loaded.
Dishes are loaded incorrectly. Load your dishes as recommended.
(See page 16.)
The pressure of the supplied water is The proper pressure of the supplied
insufficient, water is 20-120 psi (140-830 kPa).
Improper detergent is being used. Use a automatic dishwasher
detergent.
There is no rinse aid. Check the dispenser and add the
rinse aid.
The water is too hard. Add a water softener.
Sound is generated when the
dispenser cover is open.
Sound is generated when the drain
pump is operating in an early stage.
The dishwasher is not level.
There is a 'chopping' sound because
a nozzle is bumping against the
dishes.
This is normal operation.
Ensure the dishwasher is level.
Rearrange the dishes.
Leaves glasses with a The supplied water is soft and too Underload the dishwasher and use a
dim polish, much detergent is being supplied, rinse aid to minimize this.
Leaves black or gray Aluminum dishes have been loaded. Remove the marks on the dishes
marks on the dishes, using a low sensitivity cleaner.
Leaves a yellow or brown This occurs from coffee and tea Remove the soils using a spot
film on the inside of the soils, cleaner.
dishwasher.
Does not have any lamps
lit up.
Does not have a
smoothly rotating nozzle.
Has a bent upper rack
after loading dishes.
The power is not connected.
The fuse is broken or the circuit
breaker is out of order.
The nozzle hole is clogged with food
particles.
The dishes are not loaded properly.
Connect the power cable.
Replace the fuse or repair the circuit
breaker.
Clean the nozzle hole.
Load your dishes as recommended.
(See page 16.)
Loading ...
Loading ...
Loading ...