Loading ...
Loading ...
Loading ...
7
Always use salt intended for use with dishwasher .
WATER SOFTENER
The hardness of the water varies from place to place. If hard water is
used in the dishwasher, deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses salts
specifically designed to eliminate lime and minerals from the water.
DISHWASHER SETUP
DISHWASHER SETUP
The salt container is located beneath the lower basket and should be
filled as follows:
Attention!
Only use salt specifically designed for use in dishwashers! All other
types of salt not specifically designed for use in a dishwasher,
especially table salt, will damage the water softener. In case of
damages caused by the use of unsuitable salt the manufacturer does
not give any warranty nor is liable for any caused damages.
Only fill with salt just before starting one of the complete washing
programmes. This will prevent any grains of salt or salty water, which
may have been split, remaining on the bottom of the machine for any
period of time, which may cause corrosion.
After the first wash cycle the control panel light expires.
Remove the lower basket and then unscrew and remove the cap
from the salt container.
If you are filling the container for the first time, fill 2/3 of its volume
with water (around 500ml).
Place the end of the funnel (supplied) into the hole and introduce
about 3.3lb (1.5kg) of salt. It is normal for a small amount of water
to come out of the salt container.
Carefully screw the cap back on.
Usually, the salt warning light will be off in 2-6 days after the salt
container is filled with salt.
B. Loading the Salt into the Softener
A.
B.
C.
D.
E.
1
2
11
Loading ...
Loading ...
Loading ...