Loading ...
Loading ...
Loading ...
20
It is dangerous to open the door when washing, because the hot
water may scald you.
Switch Off the Dishwasher
The digital display appears "---" and the buzzer rings 6 times, only in
this case the programme has ended.
1. Switch of f the dishwasher by pressing the"Power" button.
2. Open the door carefully. Hot steam may escape when the door is
opened!
■Hot dishes are sensitive to knocks. The dishes should therefore be
allowed to cool down around 15 minutes before removing from the
appliance.
■Open the dishwasher's door, leave it ajar and wait a few minutes
before removing
the dishes. In this way they will be cooler and the drying will be
improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid
water dripping from the upper basket onto the dishes in the lower
one.
Forget to Add Dish
A forgotten dish can be added any time before the detergent
dispenser opens.
1 Open the door a little to stop the washing.
2 After the spray arms stop working, you can open the door
completely.
3 Add forgotten dishes.
4 You need press the Start/Pause button and close the door within 4
seconds and the dishwasher will work after ten seconds.
WARNING!
OPERATING THE DISHWASHER
OPERATING THE DISHWASHER
NOTE: A click should be heard when the door is closed perfectly.
When the washing is over, you can shut off the switch by
pressing “Power” button.
Change the Program
The ongoing cycle can only be modified if the dispenser cover is not
open (the door can be opened for viewing).
Otherwise, the detergent may have already been released, and the
appliance may have already drained the wash water. If this is the
case, the detergent dispenser must be refilled (see the section
entitled :Fill in the Detergent”). Press “Power” button to cancel
the programme, and turn it on again, then you can change the
programme to the desired cycle setting (see the section entitled
“Starting a wash cycle...”).
NOTE: If you open the door when washing, the machine pauses and
warning alarm rings, the display appears E1. You need to press the
Start/Pause button and close the door within 4 seconds and the
dishwasher will continue working. If the door is not closed within 4
seconds after pressing the Start/Pause button, the Digital Display is
off. In this state, the door is closed and the dishwasher will not start.
Press the Start/Pause button again, the Digital Display indicator lights
up, and the door is closed within 4 seconds. The dishwasher will be
continue working.
The 6 program lights show the state of the dishwasher:
a) One of the program lights on--> cycle running
b) One of the program lights blinking -->pause
NOTE: If all the lights begin to glimmer, that indicates the machine is
out of order, please turn off the main power and water supply before
calling a service.
Loading ...
Loading ...
Loading ...