Loading ...
Loading ...
Loading ...
Clark
Water hardness
Range
Mmol/l
Set value on
the machine
0-8
9-10
11-12
13-15
16-20
21-26
27-38
39-62
soft
soft
medium
medium
medium
hard
hard
hard
0-1.1
1.2-1.4
1.5-1.8
1.9-2.1
2.2-2.9
3.0-3.7
3.8-5.4
5.5-8.9
H0
H1
H2
H3
H4
H5
H6
H7
Water hardness table
6
The water softener is designed to remove minerals from the water,
which would have a detrimental or adverse effect on the operation of
the appliance. The higher the content of these minerals and salts, the
harder the water is. The softener should be adjusted according to the
hardness of the water in your area. Your local Water Authority can
advise you on the hardness of the water in your area.
Before using your dishwasher for the first time:
A. Set the water softener
B. Pour 500ml of water inside the salt container and then fill with
dishwasher salt
C. Fill the rinse aid dispenser
DISHWASHER SETUP
DISHWASHER SETUP
A. Water softener
Setting
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1. Find out about the hardness value of your tap water. Your water
utility company will help you with this.
2. Set value can be found in the water hardness table.
3. Close the door.
4. Switch on"Power"switch.
5. Hold down "Delay" button and then press "Program" button for
5 seconds.The buzzer rings one time and H.. flashes on the digital
display. (Factory setting is H1)
To change the setting:
1. Press " Delay " button.
Each time the button is pressed, the set value increases by one level;
when the value of H7 has been reached, the display jumps back to
H0(off).
2. Press " Program " button. The chosen setting has now been
stored. Contact your local water board for information on the
hardness of your water supply.
Loading ...
Loading ...
Loading ...