Loading ...
Loading ...
Loading ...
Remove arm cover plate to oil points indicated at
top of machine head. To remove cover plate,
take disc out from machine, remove top screws
and lift cover. Fig. B
It may be necessary to clean the shuttle area occasionally.
1. Raise the needle bar to its highest 3. Clean the shuttle race of any lint or
point and remove bobbin case. small particles of thread with a small
2. Push levers sideways from the shu- brush.
ttle assembly and lift shuttle race 4. Put a drop of oil on the center pin
cover and shuttle out by the center of the shuttle and on shuttle race
pin. (see arrows).
34
Shuttle Assembly
Loading ...
Loading ...
Loading ...