Loading ...
Loading ...
Loading ...
SETTING
STITCH
LENGTH
Turn stitch length control knob to the desired
point between 0 and 5. The red mark indicates the
setting for a satin stitch. This will vary slightly
depending upon the type of material to be sewn.
The 5 setting is the longest stitch. The size of
the stitch selected will depend on the fabric sewn.
REVERSE
STITCHING
Push button when reverse stitching is required.
Reverse stitching, often called back tacking is used
for reinforcing and finishing all seams.
TURNINGA
CORNER
Stop sewing machine with needle in fabric. Raise
presser foot. Turn fabric. Lower presser foot
and continue stitching.
BASTING
For accomplishing quicker, more even and firmer
basting, we suggest you regulate the machine in
the following manner; Set stitch length at No. 5
for the longest possible stitch. Basting is easily
removed by pulling bottom thread. When basting
very sheer fabrics, use a paper backing.
16
FASTENING
A
SEAM
Be sure both threads are drawn back under the
presser foot. Lower needle into fabric about ½ inch
from beginning of seam. Push button and stitch in
reverse until needle reaches beginning of seam.
Release button and complete seam.
When you reach the end, push button and sew back
over ½ inch of completed seam.
Loading ...
Loading ...
Loading ...