Loading ...
Loading ...
Loading ...
7 Trouble-shooting
DisplayPossible causeSolution
Foam in main
wash:
Rinsing extended
▪ If there is very heavy
foaming, the programme
is automatically extended
by a rinsing cycle. This
improves the wash res-
ults, but extends the pro-
gramme time.
▸Reduce the amount of washing deter-
gent used next time.
▸Adjust detergent dosage to water
hardness (see page 15).
Hygiene recom-
mend.
▪ No wash cycle has been
carried out at a temperat-
ure of at least 60 °C for
a longer period of time.
▸With one of the next wash cycles carry
out a wash with at least 60°C.
Or:
▸Run «Appliance hygiene» programme
without laundry (see page 23).
Inlet water very
cold:
Heating extended
▪ Inlet water is very cold.
Heating is extended.
▸No action is necessary.
Too many items:
Heating extended
▪ The selected programme
is intended for a smaller
load. Heating and pos-
sibly rinsing is extended.
▸Adjust load to the max. load size (see
page 13).
Large unbalanced
load:
Spin extended
▪ The appliance optimizes
the distribution of the
wash load to com-
pensate an unbalanced
load. The final spin is ex-
tended.
▸Wash large and small items together
to avoid large unbalanced loads.
7.2 Other possible problems
ProblemPossible causeSolution
The washing has
not been spun or
has been spun in-
sufficiently.
▪ The spin speed set is too
low.
▸Increase the spin speed for the next
wash cycle (see page 28).
▪ Too large an unbalanced
load in the washing
drum.
▸Wash large and small items together.
▪ «Steam anti-crease» was
selected and the appli-
ance was not standing
level.
▸Optimize appliance set-up according
to installation instructions.
37
Loading ...
Loading ...
Loading ...