Loading ...
Loading ...
Loading ...
21
EN
Instructions for the installer
Installation
This appliance is not provided with a
combustion product discharge. It is
recommended that it be installed in
suciently aerated places, in terms of the
laws in force. The quantity of air which is
necessary for combustion must not be
below 2.0 m3/h for each kW of installed
power.
See table of burner power.
Note: the device is in installation class 3.
The appliance’s adjustment parameters
are shown on the plate attached to its
housing.
Positioning
(Fig. 4). The appliance can be tted
into a working area as illustrated
on the corresponding gure. Before
positioning the hob, t the seal
around the entire periphery of the hole
cut in the worktop.
Gas connection
(Fig. 5) Connect the appliance to the gas
cylinder or to the installation according
to the prescribed standards in force, and
ensure beforehand, that the appliance
matches the type of gas available.
Otherwise, see “Adaptation to various
types of gas”.
Furthermore, check that the feed pressure
falls within the values described on the
table: “User chacteristics”.
Fig. 5
Rigid/semi rigid metal connection
Carry out the connection with ttings
and metal pipes (even exible pipes)
so as to obtain counter stress the inner
parts of the appliance.
N.B. - when the installation has been
carried out, check the perfect sealing of
the entire connection system, by using
a soapy solution.
Electrical connection
(Fig. 6) Prior to carrying out the electrical
connection, please ensure that:
• the plant characteristics are such as
to fol- low what is indicated on the
matrix plate placed at the bottom of
the working area;
• that the plant is tted with an ecient
earth connection, following the
standards and law provisions in force.
The earth connection is compulsory
in terms of the law.
Should there be no cable and/or plug on
the equipment, use suitable absorption
material for the working temperature as
well, as indicated on the matrix plate.
Under no circumstance must the cable
reach a temperature above 50°C of the
ambient temperature.
If connecting directly to the mains
power supply, t a multi-pole switch of a
Loading ...
Loading ...
Loading ...