Loading ...
Loading ...
Loading ...
62
63
English
If seawater enters the watch, place the watch in a box or plastic bag and immediately take it in for •
repair. Otherwise, pressure inside the watch will increase, and parts (crystal, crown, buttons, etc.) may
come off.
CAUTION Keep your watch clean
Leaving dust and dirt deposited between the case and crown may result in difficulty in pulling the •
crown out. Rotate the crown while in its normal position, from time to time, to loosen dust and dirt
and then brush it off.
Dust and dirt tend to be deposited in gaps in the back of the case or band. •
Deposited dust and dirt may cause corrosion and soil your clothing. Clean the watch occasionally.
Cleaning the Watch
Use a soft cloth to wipe off dirt, perspiration and water from the case and crystal.•
Use a soft, dry cloth to wipe off perspiration and dirt from the leather band.•
To clean a metal, plastic, or rubber watchband, wash away dirt with mild soap and water. •
Use a soft brush to remove dust and dirt jammed in the gaps in the metal band. If your watch is not
water-resistant, take it to your dealer.
Note: Avoid using solvents (thinner, benzine, etc.), as they may damage the finish.
WARNING Water-resistance performance
Water-resistance for daily use (to 3 atmospheres): This type of watch is water-resistant to minor •
exposure to water. For example, you may wear the watch while washing your face; however, it is not
designed for use underwater.
Upgraded water-resistance for daily use (to 5 atmospheres): This type of watch is water-resistant to •
moderate exposure to water. You may wear the watch while swimming; however, it is not designed
for use while skin diving.
Upgraded water-resistance for daily use (to 10/20 atmospheres): This type of watch may be used for •
skin diving; however, it is not designed for scuba or saturated diving using helium gas.
CAUTION
Be sure to use the watch with the crown pressed in (normal position). If your watch has a screw lock •
crown, be sure to tighten the crown completely.
Do NOT operate the crown or button with wet fingers or when the watch is wet. Water may enter the •
watch and compromise water-resistance.
If the watch is used in seawater, rinse with fresh water afterward and wipe with a dry cloth.•
If moisture has entered the watch, or if the inside of the crystal is fogged up and does not become •
clear within a day, immediately take the watch to your dealer or Citizen Service Center for repair.
Leaving the watch in such a state will allow corrosion to form inside.
Loading ...
Loading ...