Loading ...
Loading ...
Loading ...
48
49
English
Using the Alarm5.
The alarm uses the 24-hour system. Once set, an alarm sound will be emitted for 15
seconds once every day at the set time.
The alarm is emitted according to the time in time (TME) mode. It cannot be set for
local time (L-TM).
[Setting the Alarm Time]
Rotate the crown while in position 1 to align the 1.
mode hand with alarm [ALM] mode as indicated
on the mode sub dial. The hands will move to
the following positions:
Second hand: This hand points to the 30 seconds •
position.
24-hour hand, hour hand, minute hand: Will •
move to indicate the time at which the alarm is
set.
Pull the crown out two steps to position 2.2.
The alarm setting is automatically turned ON.•
Rotate the crown to the left (counterclockwise) or right (clockwise) to adjust the 3.
desired time difference (hours only).
Rotate the crown to the right (clockwise) 1 ‘click’ to move the hour hand, minute •
hand, 24 hour hand clockwise by 1 hour.
Rotate the crown to the left (counterclockwise) 1 ‘click’ to move the hour hand, •
minute hand, 24 hour hand counterclockwise by 1 hour.
Quickly rotate the crown 2 or more clicks consecutively to advance the hour hand, •
minute hand, 24 hour hand rapidly. Rotate the crown to the left or right 1 ‘click’ to
stop rapid advancement.
A time difference of up to +/-27 hours can be set versus the current time.
Make sure to correctly set the time difference in terms of AM/PM, using the 24-hour •
hand as a guide.
Note:
The date will adjust automatically by 1 day when the hour hand passes 12:00 •
midnight.
Return the hour hand in the opposite direction of the setting to restore the time •
difference to original status.
After local time has been set, return the crown two steps to its normal position to 4.
complete the setting.
(2)
(A)
(B)
Setting the alarm
Loading ...
Loading ...
Loading ...