ADJ MYDMX 3.0 User Manual

Loading ...

myDMX 3.0 / Live

Advanced Button Mapping

It’s possible to change the individual components of the MIDI message. The incoming MIDI message can

be speciﬁed on the left and the outgoing MIDI message is speciﬁed on the right.

Options include:

Type : The type of MIDI message. Be careful with button release commands. Some controllers use

NoteOn - 0, other controllers use NoteOﬀ - 127. In the second case, a Note On/Oﬀ message type

should be used

Channel : The channel number from 1-16

Number : The Note/CC/PC number from 0-127

On : The value to be used to play the scene

Oﬀ : The value to be used to stop the scene

Enable Note Oﬀ and velocity/value 0 : the software will only listen to note oﬀ messages and

messages containing value 0 if this is checked

Feedback when data received : check this box if you need the software to send the MIDI OUT

message when the button is triggered by the MIDI controller. For example, this is required on an

AKAI APC controller because the hardware does not switch on it’s LEDs unless it’s told to by an

incoming MIDI message. A Behringer BCF2000 however does not require this as the controller

switches on its own LED. Be careful with this option as some controllers repeat back their incoming

message in which case an inﬁnite MIDI loop can be created

Loading ...

ADJ MYDMX 3.0 Products DMX Control Software