Loading ...
Loading ...
Loading ...
55
INSTALLATION (CONTINUED)
A. The Cushion Ring and the Lower Mount Ring will remain
attached to the disposer during installation. Take apart
the other parts of the mounting assembly by rotating the
Lower Mount Ring clockwise until the Lower Mount Ring
Tabs slide o from the Upper Mount Ring ramp (see A1).
This allows you to pull the Sink Flange up and out of the
remaining Lower Mount Assembly. Note the order of these
parts as they are arranged in the required order. Unscrew
the 3 Mount Screws until the Upper Mount Ring can be
moved to the top of the Support Flange. Remove the
Retainer Ring with a fl at head screw driver (see A2).
B. Keep the remaining parts placed together in the order
they were removed (see B1). Before you connect the
disposer to the mount assembly under the sink, make sure
the Lower Mount Ring is in place and the black Cushion
Ring is still engaged properly to the top of the disposer
hopper (see B2).
C. Be sure the sink is clean. Load the underside rim of the
sink fl ange with plumber’s putty (see C1). From top of
the sink, push the sink fl ange down against the sink
opening to make a good seal (see C2). DO NOT MOVE
OR ROTATE the sink fl ange once it has been seated or
the seal may be broken.
D. Place a heavy object, such as the disposer
(use a towel to prevent sink scratching) on
top of the Sink Flange to hold it down.
Loading ...
Loading ...
Loading ...