Zephyr AK8800AS User Manual

Loading ...

Installation – Mounting Height & Clearance

www.zephyronline.com

DUCTING

A minimum of 8” round ducting must be used to

maintainmaximumairowefciency.

Always use rigid type metal ducts only. Flexible

ductscouldrestrictairowbyupto50%.

Alsousecalculation(onpage5)tocomputetotal

available duct run when using elbows, transitions

and caps.

ALWAYS, when possible, reduce the number or

transitions and turns. If long duct run is required,

increase duct size.

If turns or transitions are required; install as far

away from hood duct output and as far apart,

between the two as possible.

Minimum mount height between range top to hood

bottom should be no less than 30”.

Maximum mount height should be no higher than

36”.

It is important to install the hood at the proper

mounting height. Hoods mounted too low could

resultinheatdamageandrehazard;whilehoods

mounted too high will be hard to reach and will

loseitsperformanceandefciency.

If available, also refer range manufacturer’s height

clearance requirements and recommended hood

mounting height above range.

AK8800Ax

Vertical Ducting:

8”roundminimum(dualblower)

Horizontal Ducting:

N/A

DAMAGE-SHIPMENT / INSTALLATION:

• Pleasefullyinspectunitfordamagebefore

installation.

• Iftheunitisdamagedinshipment,returnthe

unit to the store in which it was bought for

repair or replacement.

• Iftheunitisdamagedbythecustomer,repair

or replacement is the responsibility of the

customer.

• Iftheunitisdamagedbytheinstaller(ifother

thanthecustomer),repairofreplacementmust

be made by arrangement between customer

and installer.

Min 30" - Max 36"

36"

Loading ...

Zephyr AK8800AS

User Manual - Page 8