Zephyr AK8800AS

User Manual - Page 14

For AK8800AS.

PDF File Manual, 18 pages, Read Online | Download pdf file

AK8800AS photo
Loading ...
Loading ...
Loading ...
12
www.zephyronline.com
Maintenance – Cleaning, Installing Filters, Lights
SURFACE MAINTENANCE:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/
scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and
grain.Alwaysscrublightlyusingamicroberorcleancottonclothandwiththegrain.
Bafe Filters
Theltersareintendedtotrapresidueandgreasefromcooking.Althoughtheltersshouldneverneedreplacing,they
are required to be cleaned every 30 days or more often depending on cooking habits.
FiltersmaybeplacedindishwasheratlowheatorsoakedinhotsoapywaterDryltersandre-installbeforeusinghood.
Installing Bafe Filters (FIG 4):
1. Placelterintotopgrooveofthepowerpackasshownand
pull towards front of power pack using handles.
2. Pivotbackoflterupwardssoitisangledinthepowerpack.
3.Pushlterintochannelonbackofpowerpacktolockintoplace.
Replacing/Ordering Bafe Filters:
Hood Model: Part No. Qty. to Order
AK8800Ax 50210010 2
1
2
FIG 4
3
REPLACING LIGHT BULBS
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does
not unscrew; it turns 60 degrees, stops and falls out.
Ifbulbsaredifculttoturnduetoprolongeduse,rmlyattach
the provided glass suction cup or use a rubber/latex glove and
turn counter clockwise.
Replacement bulbs are available at www.zephyronline.com or
specialty lighting stores. Purchase type GU-10, 35W halogen.
CAUTION: If this hood is installed in a salt water area (example: coast),
rinse all surfaces once a week with clear water (even if the hood is not used), and wipe dry completely.
!
Loading ...
Loading ...
Loading ...