Loading ...
Loading ...
Loading ...
14
Intensive Drying
The final rinse uses a higher temperature which improves the drying results. The
running time may increase slightly.
To turn intensive drying on:
1 Press the
[On/Off]
button.
2 Hold down the “
A
” button (see page 13) and press
[Start]
until the display
indicates “
d:00
”. Release both buttons
3 Press the “
A
” button until the display shows “
d:00
”.
4 Press the “
C
” button to turn intensive drying on or off. “
d:01
” = ON and
“
d:00
” = OFF
5 Press [Start] to save setting.
Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends.
Auto Power Off can be adjusted from P:00 to P:02.
To change the factory setting (P:01):
1 Press the
[On/Off]
button.
2 Hold down the “
A
” button and press
[Start]
until the display indicates
“
d:00
”. Release both buttons.
3 Press the “
A
” button until the display indicates “
P:01
”.
4 Press the “
C
” button until the display corresponds with your require-
ments.
P:00
= dishwasher does not turn off automatically
P:01
= dishwasher turns off automatically after 1 minute
P:02
= dishwasher turns off automatically after 120 minutes (2 hours)
5 Press
[Start]
to save the setting.
InfoLight®
An LED illuminates the floor to indicate the unit is running. If the appliance is
installed at eye-level, the LED is not visible.
To change the setting:
1 Open the door and press the
[On/Off]
button.
2 Hold down the “
A
” button (see page 13) and press
[Start]
until the display
indicates “d:00”.
3 Release both buttons.
4 Press the “
A
” button until the display shows “
1:01
”.
5 Press the “
C
” button to switch between “
1:01
” = ON and “
1:00
” = OFF
and press
[Start]
to save.
Loading ...
Loading ...
Loading ...