Loading ...
Loading ...
Loading ...
11
Setting the amount of rinse aid
The amount of rinse aid dispensed can be set from “r:00” to “r:06”.
To change the setting:
1 Press the
[On/Off]
button.
2 Hold down the “
A
” button (see page 13) and press
[Start]
until the display
indicates “
d:00
”. Release both buttons.
3 Press the “
A
” button until the display shows “
r:05
”.
4 Press the “
C
” button to select the desired setting.
r:00
= dispenser is OFF
r:01
= lowest setting
r:02
= low setting
r:03
= medium setting
5 Press
[Start]
to save the setting.
Dishwasher Cycles and Options
Wash Cycles
Pots & Pans:
Best for cleaning items with baked-on food or grease. These dishes
would normally require soaking.
Auto:
With our most complex soil sensing capability, this cycle is perfect for use with
mixed loads of dishware and varying amounts of food soil. This is the most flexible
cycle and is a good choice for everyday use.
Normal:
Thoroughly cleans a full load of normally soiled dishes.
Note: The Energy Guide Label was based on this soil sensing cycle with all avail-
able options turned off. As prescribed in the energy test procedure, the unit was
tested without any Rinse Aid in the Rinse Aid dispenser. A single dose of deter-
gent was used in the Detergent Dispenser, with no detergent used in the prewash.
The test was conducted with the upper rack in the highest position.
Quick:
Cleans lightly soiled dishes and reduces overall wash time.
Wash Cycle Options
Delay Start:
Allows you to delay the start time of your dishwasher up to 24 hours.
Half Load:
The Half Load option can reduce the energy and water consumption
when washing small, lightly soiled loads that fill approximately half of the dish-
washer’s capacity. To activate select the wash cycle, select the Half Load option and
press Start.
PowerBoost®:
Combines powerful water pressure with increased water temperature
to deliver the ultimate in heavy duty washing performance throughout the dish-
washer. PowerBoost is available in the Pots & Pans, Auto and Normal cycles. To acti-
vate, select the “PowerBoost” button in addition to any of the three cycles listed
above.
Extra Dry:
Used in combination with a wash cycle, the Extra Dry option raises the
temperature and extends the drying time to further enhance drying results.
Note: The dishwasher automatically defaults to Auto when turned off and back on.
If you used the Extra Dry option in your last cycle, the dishwasher will default to
Auto Wash with the Extra Dry option selected when you turn it on.
r:04
= medium/high setting
r:05
= high setting
r:06
= highest setting
Loading ...
Loading ...
Loading ...