Loading ...
Loading ...
Loading ...
Troubleshooting en
43
Fault Cause and troubleshooting
Display for water sup-
ply lights up
7. Re-insert the filter in the supply hose.
8. Screw the water connection back on.
9. Check the water connection for leaks.
10. Restore the power supply.
11. Switch the appliance on.
Filters are soiled or blocked.
▶ Clean the filters.
→"Cleaning filters", Page40
Wastewater hose is blocked or kinked.
1. Reposition the wastewater hose without kinks.
2. Remove residues.
Siphon connection is still sealed.
▶ Check the connection to the siphon and open if ne-
cessary.
Cover of the wastewater pump is loose.
▶ Secure the cover of the Wastewater pump
→Page53 so it clicks into position.
Display "Check water
supply" flashes
A technical fault is present.
1. Press
.
2. Unplug the appliance or switch off the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the appliance in a socket
or switch on the fuse.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press
.
‒ Turn off the water tap.
‒ Pull out the mains plug.
‒ Contact Customer Service →Page55 and give
the error code.
Displays flash Appliance door is not closed properly.
▶ Close the appliance door.
‒ Arrange the tableware so that no parts project
beyond the basket and prevent the appliance
door from closing properly.
Loading ...
Loading ...
Loading ...