Loading ...
Loading ...
Loading ...
first time en
27
first time
10 Before using for the
first time
first time
Configure the settings for initial start-
up.
10.1 Performing the initial
configuration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement:The appliance has
been installed and connected.
→Page12
1.
Add special salt. →Page28
2.
Add rinse aid. →Page30
3. Switch on the appliance.
→Page36
4. Setting the water softening system.
→Page28
5. Set the amount of rinse aid to be
dispensed. →Page30
6.
Add detergent →Page31.
7. Start the Programme with the
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip:You can change these settings
and other Basic settings →Page38
at any time.
11 Water softening sys-
tem
Hard water leaves limescale on the
tub and tableware and parts of the
appliance may become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
11.1 Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water
hardness
value °E
Hardness
range
mmol/l Level LED A
→Page17
LED B
→Page17
LED C
→Page17
0 - 8 Soft 0 - 1.1 0
9 - 20 Medium 1.2 - 2.9 1
21 - 26 Hard 3.0 - 3.7 2
27 - 44 Hard 3.8 - 6.2 3
Loading ...
Loading ...
Loading ...