Loading ...
Loading ...
Loading ...
÷
r SYMPTOMS CAUSE POSSIBLE SOLUTIONS IPAGE_
VCR
TV recording does not work.
Timer recording does not
work.
Place a piece of adhesive tape over 34
the hole.
Reset the present time. 21, 22
Reset the start/end time.
41
The video cassette's erase prevention tab
is broken off.
The time is not set correctly.
The recording start/end time is not set
correctly.
The TIMER REC button have not been
pressed (the TIMER REC indicator is
not lit).
Tape is old or worn.
Tracking adiustment is beyond range of
automatic tracking circuit.
Video heads are dirty.
Press the TIMER REC button (the
TIMER REC indicator is lit).
41
Replace the tape.
Noise bars appear on the Adiust tracking manually using the TRK 36
screen. +/- buttons on the remote control.
Clean the video heads. 38
DVD
The playback picture has
occasional distortion.
The unit does not start
playback.
Playback does not follow the
course of the disc's program.
appears on the screen.
- 9
REMOTE CONTROL
The disc is dirty.
It is in fast forward or fast reverse
playback.
No disc is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
The disc is dirty.
The parental lock function is set.
It is in the mode of repeat playback,
memory playback, etc.
The function is prohibited with the unit or
the disc.
Eject the disc and clean it. 8
Some times a small amount of picture
distortion may appear. This is not a
malfunction.
insert a disc. 45
insert a playable disc (Check the disc
9
type and color system).
Place the disc with the playback side
45
down.
Place the disc correctly inside the
45
guide on the disc tray.
Clean the disc. 8
Cancel the parental lock function or
61, 62
change the parental lock level.
These operations may prevent a
proper progress of the contents.
Remote control does not
operate.
The remote control is not aimed at the
sensor.
Distance is too far or too much light in the
roorYI.
There is an obstacle in the path of the
beam.
The batteries are weak.
The batteries are not inserted correctly.
Aim the remote control at the remote
13
sensor.
Operate within 5 m or reduce the light
13
of the room.
Clear the path of the beam.
13
Replace the batteries. 13
insert correctly ...2_
÷
66
5T 0101B [E]p63-67
66 _ 3/8/05, 9:59 AM
Loading ...
Loading ...
Loading ...