Loading ...
Loading ...
Loading ...
5
WASH
The washer will fi ll to the correct water level based on the
load size and the Water Level selection. Certain cycles may
agitate during the fi ll process to boost cleaning. When the
wash cycle begins, you will hear the HE agitator increase
speed. The motor sounds may change at different stages
in the wash cycle while the washer performs different
wash actions.
NOTE: The lid will automatically lock after the wash phase
completes and before the initial spinout occurs, and will
remain locked for the rest of the cycle.
RINSE
Certain cycles use a spray rinse, which adds water to the
tub while the basket spins. You may hear the motor turning
on briefl y (short hum) to move the basket while fi lling. In
some cases, you may also hear sounds similar to the wash
cycle as the washer fi lls, rinses, and moves the load.
SPIN
The washer spins the load at increasing speeds for proper
water removal based on the selected cycle and spin speed.
DONE
Once the cycle is complete, the lid will unlock and this light
will come on. For best results, promptly remove the load.
LID LOCKED
The Lock feature allows for higher spin
speeds. When lit, the lid is locked and
cannot be opened without pausing the
cycle. When the light is off, the lid can
be opened.
To open the lid after it has been locked, press START/
PAUSE/CANCEL. The lid will unlock once the washer
movement has stopped. This may take several minutes
if the load was spinning at high speed. Press START/
PAUSE/CANCEL while the lid is closed to resume
the cycle.
Loading ...
Loading ...
Loading ...