Loading ...
Loading ...
Loading ...
10
Wash Temp Suggested Fabrics
8. Select wash temperature
Once you select a cycle, select the wash temperature
by turning the Wash Temp knob to the desired setting.
Always read and follow fabric care label instructions to avoid
damage to your items.
9. Select rinse option and water level
Select the number of rinses by turning the Rinse Option knob to
the desired setting.
IMPORTANT: The Rinse Option knob must be set to an option
“with Fabric Softener” when using the fabric softener dispenser.
This ensures that fabric softener is added at the correct time in
the rinse for even distribution.
Set the Water Level knob to the Auto Sensing setting and the
washer will automatically sense the appropriate water level for
the load size and type.
Set the Water Level knob to the Deep Water Wash setting and
the washer will automatically add more water to any cycle at any
time during the wash cycle.
NOTE: The cycle will be longer due to extended fi ll times when
using the Deep Water Wash setting.
10. Press START/PAUSE/CANCEL
to begin wash cycle
Press START/PAUSE/CANCEL to start the wash cycle. When
the cycle has fi nished, the Done progress light will light. Promptly
remove garments after cycle has completed to avoid odor, reduce
wrinkling, and avoid rusting of metal hooks, zippers, and snaps.
Unlocking the lid to add garments
If you need to add one or two missed garments after the wash
has started, simply open the lid and this will pause the cycle.
After adding the garments, simply close the lid and the cycle will
resume. The washer may add some additional water to offset the
added garments.
If, instead, you press Start/Pause/Cancel to pause the cycle
and then open the lid to add garments, you will need to press
Start/Pause/Cancel after closing the lid to resume the cycle.
NOTE: Washer will not fi ll with the lid open.
IMPORTANT: If lid is left open for more than 10 minutes, the
water will pump out automatically.
Manual soak
If you would like to manually soak your garments at any time
during the wash portion of the cycle, press START/PAUSE/
CANCEL and leave the lid closed. Once your desired soak time
has elapsed, press START/PAUSE/CANCEL again to continue
the cycle. As long as the lid remains closed, your soak time can
be longer than 10 minutes. However, if the lid is opened during
the soak and remains open for more than 10 minutes, the water
will pump out automatically.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cool is slightly warmer than Cold.
Dark colors that
bleed or fade
Light soils
Hot
Some cold water is added to save
energy. This may be cooler than your
hot water heater setting.
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Cold
Warm water may be added to assist
in soil removal and to help dissolve
detergents.
Whites and pastels
Durable items
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Tap Cold
This is the temperature
from your faucet.
7. Select soil level
Once you select a cycle, select the soil level by turning the Soil
Level knob to the desired setting.
Loading ...
Loading ...
Loading ...