Loading ...
Loading ...
Loading ...
17
If you experience Possible Causes Solution
Washer Not Performing As Expected (cont.)
Odors Monthly maintenance not done
as recommended.
See “Washer Care” in Washer Maintenance.
Unload washer as soon as cycle is complete.
Using too much detergent. Be sure to measure correctly. Always follow the
manufacturer’s directions.
See “Washer Care” section.
Lid Locked light
is flashing
The lid is not closed. Close the lid. The washer will not start or fill with the lid open.
A cycle was stopped or paused using
the Start/Pause/Cancel button.
The washer may still be spinning. The lid will not unlock until the
basket has stopped spinning. This may take several minutes if
washing large loads or heavy fabrics.
Single-dose laundry packet
not dissolving
Adding laundry packet incorrectly. Be sure laundry packet is added to washer basket before adding
clothes. Do not add packet to dispenser. Follow the manufacturer’s
instructions to avoid damage to your garments.
Washer pumps out water
before finishing cycle
Lid is left open for more than
10 minutes.
Make sure lid is closed before starting a cycle and/or during
prewash (soak).
First try the solutions suggested here or visit our website at www.maytag.com/owners
(in Canada www.maytag.ca/owners) for assistance and to possibly avoid a service call.
TROUBLESHOOTING
Loading ...
Loading ...
Loading ...