ILve 760SPYTCGV 76cm Pyrolytic Electric Built-in Oven

User Manual - Page 58

For 760SPYTCGV.

PDF File Manual, 64 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
GB
55
SOLVING OPERATIONAL PROBLEMS
Before contacting service, check the following to avoid unnecessary service charges.
OVEN PROBLEM PROBLEM SOLVING STEPS
Error F1030* or F2030*
appears in the display
window.
A problem with latch mechanism occurred. Remove
power and turn it back on again after a few seconds.
The oven should run a latch auto–test. If condition
persists, note the code number (in the EVENT LOG list)
and contact service.
Other F__ Error appears in
the display window.
Remove power and turn it back on again after a few
seconds. If condition persists, note the code number (in
the EVENT LOG list) and contact service.
The oven display stays
OFF
Turn off power at the main power supply (fuse or breaker
box). Turn breaker back on.
If condition persists, call an authorized service.
Cooling fan continues to
run after oven is turned off
The fan turns off automatically when the electronic
components have cooled sufficiently.
Oven door is locked and
will not release, even after
cooling
Turn the oven off at the circuit breaker and wait a few
seconds. Turn breaker back on.
The oven should reset itself and will be operable.
Oven is not heating Check the circuit breaker or fuse box to your house.
Make sure there is proper electrical power to the oven.
Make sure the oven temperature has been selected.
Oven is not cooking evenly Refer to cooking charts for recommended rack position.
Always reduce recipe temperature by 25°F (15°C) when
baking with Convection Bake mode.
Oven light is not working
properly
Replace or reinsert the light bulb if loose or defective.
See Page 53. Avoid touching the bulb glass with
bare fingers as finger oil may cause bulbs to burn out
prematurely.
Oven light stays on Check for obstruction in oven door. Check to see if hinge
is bent or door switch broken.
Oven will not Self-Clean
properly
Allow the oven to cool before running Self-Clean. Always
wipe out loose soils or heavy spill-over before running
Self-Clean. If oven is badly soiled, set oven for a four-
hour Self-Clean. See Preparing the Oven to Self-Clean,
Page 48.
Loading ...
Loading ...
Loading ...