1. Home
  2. Craftsman
  3. Craftsman 486248374 User Manual
  4. Page 10

Craftsman 486248374 snow blower attachment

User Manual - Page 10

For 486248374.

PDF File Manual, 36 pages, Read Online | Download pdf file

486248374 photo
Loading ...
Loading ...
Loading ...
10
FIGURE 12 VIEWED FROM LEFT SIDE
STEP 13: (SEE FIGURE 13)
•Assemblethedrivebeltontotheenginepulleyrst
and then onto the large pulley on top of the clutch/idler
assembly.Thebeltmustbeplacedinsidetheengine
pulleybeltkeeper(s)andbetweenthelargepulleyand
thekeeperboltnexttoit.
IMPORTANT: Do Notassemblethe"V"beltoutsideof
theenginepulleykeepersoroutsideofthekeeperbolt
next to the large pulley.
•Go to step 48 on page 21.
FIGURE 13 VIEWED FROM UNDERNEATH
CLUTCH/IDLER ASSEMBLY
FIGURE 11
ATTACH CLUTCH IDLER ASSEMBLY TO TRACTOR
STEP 12: (SEE FIGURE 12)
•Hooktherearoftheclutch/idlerassemblyontothe
twoshoulderboltsassembledtothetractorframe.
LiftthefrontoftheassemblyandattachittotheR.H.
andL.H.hangerbracketsusingtwolockpinsand1/8"
hairpin cotters.
•Looselyattachthemowerclutchcabletotheleftside
of the tractor frame with a nylon tie. Do not pull the
nylontiecompletelytight.Thecablemayneedtobe
removed from the nylon tie when using the mower
deck.
STEP 11: (SEE FIGURE 11)
•Findthecableclipthatisattachedtotheleftside
of the tractor frame underneath the footrest. Open
theclipandremovethemowerclutchcable.Do not
removetheclipfromthetractorframe.Thecable
reattaches to the clip when using the mower deck.
•Movetheattachmentclutchleveronthedashpanelto
the disengaged position.
•Placetheclutch/idlerassemblyontheoorontheleft
side of the tractor.
•Attachthetractor'smowerclutchcabletothecable
bracketontheclutch/idlerassembly.Securethecable
housingguide(groovedown)tothecablebracket
using the original collar and a 5/64" hair cotter pin.
•Placethesmallspacerontheweldedpinontheidler
arm.Hooktheendoftheclutchcablespringoverthe
pin and secure it with a 1/4" washer and a 5/64" hair
cotter pin.
•Aligncablebracketwithweldedpinandtightenthe
nutassembledinstep7.
PIVOT LOCK PIN
(use this hole)
SHOULDER
BOLT
L.H. HANGER
BRACKET
1/8" HAIRPIN
COTTER
NYLON TIE
MOWER
CLUTCH
CABLE
5/64" HAIR
COTTER PIN
1/4" WASHER
1/4" SPACER
5/64" HAIR
COTTER PIN
TRACTOR'S
CLUTCH CABLE
CABLE
BRACKET
ENGINE
PULLEY
ENGINE
PULLEY
Left Side
of Tractor
ENGINE
PULLEY
KEEPER
ENGINE
PULLEY
KEEPER
KEEPER BOLT
IDLER
PULLEY
Loading ...
Loading ...
Loading ...