Loading ...
Loading ...
Loading ...
INSTALLATION
37
a) CLASS (Subclass 2/1 kitchen recessed between furniture)
The apparatus must be connected to the gas mains by means of rigid or exible metal
pipes (maximum length 1.2 metres) suitable for gas appliances.
The connection pipes and their maximum lengths must conform to the applicable
standards and connected to the device by means of the ISO R228 threaded tting
(Fig. A) with the interposition of the sealing gasket, or ISO R7 (Fig. A) with metallic
seal on the thread (sealing materials may be used as long as they are suitable for gas
connections)
b) CLASS (Kitchen for free installation)
In addition to the paragraph (a), the connection can also be made with exible rubber
pipe (maximum length 1.2m). Fixed to the hose holder for LPG with the relative clamp;
The pipe must be visible and inspected throughout the route with the obligation of
replacement at the expiry date, at no point shall it reach temperatures greater than
50 °c, shall not be subject to traction and torsion stresses, shall not present Choke, it
must not come into contact with sharp parts, live edges or similar.
It is recommended to connect the tightness of the connections with
special foaming (NO ame).
The appliance is delivered to operate as indicated on the label on the appliance
Any maintenance operation, etc. It must be carried out by an authorized technician
after disconnecting the appliance from the mains and closing the gas supply.
GAS CONNECTIONS
– By the Qualied installer
Instructions
Transformation for
Other Gases
ATTENTION
Loading ...
Loading ...
Loading ...