ILve L096WMP/MGD 90cm Nero Lusso Freestanding Dual Fuel Oven/Stove

OPERATING & INSTALLATION MANUAL - Page 36

For L096WMP/MGD.

PDF File Manual, 46 pages, Read Online | Download pdf file

L096WMP/MGD photo
Loading ...
Loading ...
Loading ...
36
ATTENTION
Rules for installation
ATTENTION
The instructions below are intended for the skilled technician who will install the
cooker, regulate it and perform technical maintenance and who will ensure that these
operations are carried out in the most correct way possible, in compliance with the
regulations in force.
Important: the cooker must be disconnected from the electric socket before
performing all regulating or maintenance operations.
• Installation must be carried out in a workmanlike manner, fully complying with the
legislation in force regarding electrical installations. Otherwise, the manufacturer
disclaims any responsibility. You will nd your appliance’s wiring diagram in this
booklet.
• The appliances are prepared for connection to the voltage shown on the data plate.
Before connecting the appliance to the mains check that: -the electromagnetic
switch or the socket are able to support the appliance’s load (see dataplate);
-the power supply system must have an efcient grounding system.
The appliance is supplied with a cable but without a plug: the connection must be
made taking into account that the green-yellow cable is the ground conductor and it
must never be interrupted.
The socket must be visible and easily reachable so that the appliance can easily be
disconnected. For direct connection to the mains, it is necessary that:
-the relief valve and domestic system can support the equipment’s load (see data
plate)
-the power supply system must have an efcient grounding system
-the socket or omnipolar switch, with a minimum 3 mm contact opening, must be easily
reachable once the appliance has been installed.
- means for disconnection must be incorporated in the xed wiring in accordance with
the wiring rules
The yellow-green ground wire must never
be interrupted even by the switch. The
power cable should be positioned so
that it does not come into contact with
surfaces that have a temperature of 50
°C higher than the environment. In case
replacement of the power cable is
necessary, contact the support service.
ELECTRICAL CONNECTIONS
- Groups of cooking
Loading ...
Loading ...
Loading ...