Loading ...
Loading ...
Loading ...
6 | GV60 user guide
user guide
Flame height adjustment
To open and close solenoid valve/burner
Handset
• In standby mode: Press and hold (large flame) button to increase flame height.
Designated Low Fire and High Fire
• Double-click
(small flame) button. <LO> will be displayed.
Note: Flame goes to high fire first before going to designated low fire.
• Double-click (large flame) button. Flame automatically goes to high fire. <HI> will be
displayed.
NOTE: Not available on the HRI3E/LRI3E
NOTE: the latching solenoid valve cannot operate manually. If the battery runs down it will remain
in the last operating position. During normal operation the solenoid valve will be reset to the ON
position when the unit is switched OFF remotely.
• Press and hold (small flame) button to decrease flame height or set appliance at pilot flame.
• For fine adjustment tap the (large flame) or (small flame) buttons.
Loading ...
Loading ...
Loading ...