Loading ...
Loading ...
Loading ...
26
Operating Instructions
FOLLOW ME SETTING
This feature can be activated through the remote control ONLY. When the Follow Me feature is activated,
the remote will then act as the thermostat instead of the unit, helping the unit to more accurately cool to
your desired temperature by sensing the ambient temperature of the area where the remote is located.
• To activate the Follow Me feature, point the remote control towards the unit and press the
“Follow Me” button. The remote control will display the actual temperature at its current location.
The remote control will send this signal to the air conditioner every 3 minutes until the Follow
Me button is pressed again. If the unit does not receive the Follow Me signal during any 7-minute
interval, the unit will beep to indicate that the Follow Me mode has ended.
• To deactivate this feature, just press the FOLLOW ME button again.
ERROR CODES
AS - Room temperature sensor error
ES - Evaporator temperature sensor error
HS - Electric heating sensor error
CS - Condenser temperature sensor error
OS - Outside temperature sensor error
E7 - Unit malfunction
NOTE: When an error code appears, unplug the unit and restart it. If the error code reappears, contact
Customer Service.
Fresh Air Vent Control
Note: Only applicable to HME030526N (10K), HME030527N (12K) and HME030528N (14.5K)
Fig. A ( Vent Closed) Fig. B ( Vent Open) Fig. C ( Vent & Exhaust Open)
The Fresh Air Vent allows the air conditioner to:
• Recirculate the inside air when the vent is closed. (See Fig. A)
• Draw fresh air into the room when the vent is open. (See Fig. B)
• Exchange air from the room and draws fresh air into the room when the vent and the exhaust are
open. (See Fig. C)
Loading ...
Loading ...
Loading ...