Loading ...
Loading ...
Loading ...
21
Installation
NOTE: Before driving the screws, drill 5 holes
through the holes in the frame lock and frame
extensions into the window sash as shown.
1/2" Screw
1/2" Screw
For Wooden
Window
For Vinyl-Clad
Window
2. To secure the lower sash in place, attach the
sash lock at right angle using the 3/4" (19 mm)
or 1/2" (12.7 mm) screws as shown.
3. Cut the foam seal and insert it in the gap
between the upper and lower sashes.
6. INSTALL THE WEATHER STRIPPING
ONLY APPLICABLE TO MODELS WITH
THE ENERGY STAR RATING
In order to minimize air leaks between the air
conditioner and the window opening, trim the
weather stripping to a proper length, peel the
protective backing off, and plug any gaps if needed.
IF AC IS BLOCKED BY A STORM WINDOW
Add the wood as shown below, or remove the
storm window before the air conditioner is
installed. If the Storm Window Frame must be
kept, make sure the drain holes or slots are not
caulked or painted shut, and the accumulated rain
water or condensation can be drained out.
Removing the AC From the Window
Turn the AC off and disconnect the power cord.
Remove the sash seal from the windows, and
unscrew the safety sash lock.
Remove the screws installed through the frame
and frame - lock.
Close the (slide) side panels into the frame.
Keeping a firm grip on the air conditioner, raise and
remove the sash carefully.
Sash
The storm
window frame
or other
obstruction
Follow the
required board
thickness for
proper pitch
to rear along
the entire sill.
Fasten with the
nails or screws.
Loading ...
Loading ...
Loading ...