Loading ...
Loading ...
Loading ...
30
Pre-Collision Braking System
When there is a risk of a collision with an obstacle in front (a vehicle, pedestrian, cyclist,
etc.), the EyeSight system helps to prevent or minimize a collision by warning the driver. If
the driver still does not take evasive action to avoid a collision, the brakes can be automati-
cally applied just before the collision in order to reduce impact damage, or if possible, pre-
vent the collision. If the driver takes evasive action to avoid a collision, Pre-Collision Braking
Assist will operate in order to help the driver to prevent or minimize the collision.
This system can be effective not only with direct rear-end collisions, but also with offset
rear-end collisions. In addition to rear-end collisions, this system can be effective for avoid-
ing collisions with crossing pedestrians and cyclists and with oncoming vehicles and pedes-
trians when turning. This function can be activated when the select lever is in the “D”, “M”
(models with manual mode), “L” (models with “L” position) or “N” position.
WARNING
Pre-Collision Braking System operation
• Never use Pre-Collision Braking System and Pre-Collision Braking Assist to
stop your car or avoid a collision under ordinary conditions. These functions
cannot prevent collisions under all conditions. If the driver relies only on Pre-
Collision Braking System for Brake operation, collisions may occur.
• When a warning is activated, pay attention to the front of the vehicle and its
surroundings, and operate the brake pedal and/or take other actions if neces-
sary.
• The EyeSight Pre-Collision Braking System is primarily designed to prevent
rear-end collisions with other vehicles when possible or to minimize damage
and injuries in the event of a collision. In addition to other vehicles, things
such as motorbikes, cyclists and pedestrians can also be treated as obsta-
cles. However, there may be cases when detection is not possible depending
on a variety of conditions
*2
. For example, when a vehicle is viewed from the
side, oncoming vehicle, vehicles approaching in reverse, small animals or
children, or walls or doors are not likely to be detected.
• Pre-Collision Braking System will operate at the point when it determines that
a collision cannot be avoided and is designed to apply strong braking force
just before a collision. The result of this varies depending on a variety of con-
ditions
*2
. Because of this, performance of this function will not always be the
same.
• When Pre-Collision Braking System is activated, it will continue to operate
even if the accelerator pedal is partially depressed. However, it will be can-
celed if the accelerator pedal is suddenly or fully depressed.
B8312BE-A.book 30 ページ ２０２１年５月３１日 月曜日 午後３時２０分
Loading ...
Loading ...
Loading ...