Loading ...
Loading ...
Loading ...
Conventional Cruise Control
151
■ Restoring the previously set vehicle speed
The previously set vehicle speed is stored in memory. To restore that vehicle speed, press
the RES/SET switch to the “RES/+” side. (Conventional Cruise Control indicator)
changes from white to green.
You can restore the set vehicle speed when the previously set vehicle speed has been
stored and the current vehicle speed is approximately 20 mph (30 km/h) or more.
NOTE
• The vehicle speed stored in memory is erased in the following circumstances:
- The cruise control is turned off by pressing the (CRUISE) switch.
- The cruise control mode was switched from Conventional Cruise Control to
Adaptive Cruise Control.
• The vehicle drives constantly and correspondingly to the set vehicle speed
between 20 mph (30 km/h) and 90 mph (145 km/h)*.
*: For Mexico models, 30 km/h and 200 km/h.
• If there is no vehicle speed stored in the memory (previous vehicle speed),
the current vehicle speed is set when the RES/SET switch is pressed to the
“RES/+” side.
Page 144
S03395
S03040
Green
B8312BE-A.book 151 ページ ２０２１年５月３１日 月曜日 午後３時２０分
Loading ...
Loading ...
Loading ...