Loading ...
Loading ...
Loading ...
Your new tractor has been assembled at the factory with exception of those parts left
unassembled for shipping purposes. To ensure safe and proper operation of your tractor
all parts and hardware y_u assemble must be tightened securely. Use the correct tools
as necessary to insure proper tightness. Review the video cassette before you begin.
TOOLS REQUIRED FOR
ASSEMBLY
-A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listed below,
(I) 9/16" wrench (I) 314"Socket w/
(1)Pliers drive rachet
(1) 1/2" wrench (1) PhillipsScrew-
(1) Utilityknife driver
(1) Tire pressure gauge
When rightor left hand is mentioned in
this manual, it means, from your pointof
view, when you are in the operating posi-
tion (seated behind the steering wheel).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
• Remove all accessible loose parts and
parts boxes from shipping carton (See
page 6).
• Cut, from top to bottom, along lines on
all four comers of shipping carton, and
lay panels flat.
• Check for any additional loose parts or
boxes and remove.
BEFORE ROLLING TRACTOR OFF
SKID
ATTACH STEERING WHEEL
• Remove hex bolt, lock washer and large
flat washer from steering shaft.
• Position front wheels of the tractor so
they are pointing straight forward.
• Slide the steering sleeve over the steer-
in._shaft.
• Ahgn tabs and press steering sleeve
extension into bottom of steering wheel.
• Position steering wheel so cross bars
are horizontal (left to right) and slide
onto steering wheel adapter.
• Secure steering wheel to steering shaft
with hex bolt, lock washer and large flat
washer previously removed. Tighten
securely.
• Snap steering wheel insert into center
of steering wheel.
• Remove protective materials from trac-
tor hood and grill.
IMPORTANT: Check for and remove any
staples in skid that may puncture tires
where tractor is to r011off skid.
I !l en0
Wheel Insert
_... Hex Bolt
_._-Lock Washer
@---..-__ Large Rat
Washer
Steering
Steering Wheel
Wheel Adapter
Steering _......._:::=- Tabs
Sleeve _ /
Extension ,;T.__-__..._.
_._1loll I I \ _/I I
"' '
Steering ] e, ! ,
_leeve __
TO ROLL TRACTOR OFF SKID (See
Operation section for location and
function of controls)
Press lift lever plunger and raise attach-
:ment lift lever to
itshighest
position.
Release parking brake by depressing
clutch/brake pedal.
• Place gearshift lever in neutral (N) posi-
tion.
• Roll tractor forward off skid.
Remove mower and packing materials.
•" Remove ties from V-belts.
8
Loading ...
Loading ...
Loading ...