Craftsman 917273320 26.0 HP ELECTRIC STAR_ 50" MOWER AUTOMATIC GARDEN TRACTOR

Owner's Manual - Page 33

For 917273320.

PDF File Manual, 65 pages, Read Online | Download pdf file

917273320 photo
Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
_ROBLEM
Loss of power
CAUSE
Cuttingtoo much grass/too
fast.
Throttle in =CHOKE" positioo.
Build-upof gross, leaves and
trash under mower.
Dirtyair filter.
Low oillevel/dirty oil.
Faultyspark plug.
Dirtyfuel filter.
Stele or dirtyfuel.
Water in fuel.
Excessive vibration
Engine continuesto
runwhen operator
leaves seat with at
techment clutch
engaged
Poor cut - uneven
Mower blades will not
mtete
Spark plug wire loose.
CORRECTION
Set in "Higher Cut"posi-
fion/reducespeed.
Adjustthrottle control.
Clean underside of mower hous-
ing.
Clean/replace air tilter.
Check oil level/change oil.
Clean and regap or change
spark plug.
Replace fuel tilter.
Drain fuel tank and refillwith
fresh gasoline.
Drain fuel tank and carburetor,
refilltank with fresh gasoline and
replace fuel tilter.
Connect and tighten spark plug
wire.
Clean engine air screen/tins.
Clean/replece muffler.
Check all wiring.
See "ToAdjust Carburetor"in
Service and Adjustments
section.
Contact an authodzed service
center.
Dirty engine air screen/tins.
Dirty/cloggedmuffler.
Loose or damaged wiring.
Carburetor out of adjustment.
Engine valves out of adjust-
ment.
•Wom, bent or loose blade.
Bent blade mandrel.
Loose/damaged part(s).
Faultyoperator-safety pres-
ence controlsystem.
•Wom, bent or loose blade,
Mower deck not level.
Buildupof grass, leaves, and
trash under mower.
Bent blade mandrel.
Clogged mower deck vent
holes from buildupof
grass, leaves, and trash
around mandrels.
Obstructionin clutchmecha-
nism.
Worn/damaged mower drive
bell
Replace blade. Tighten blade
bolt.
Replace blade mandrel.
Tighten loose part(s). Replace
damaged parts.
Check wiring, switches and con-
nections,If not
corrected, contact an authorized
service center/
department,
Replace blade. Tighten blade
boll
Level mower deck.
Clean underside of mower hous-
ing.
Replace blade mandrel.
Clean around mandrels toopen
vent holes.
Remove ob_n.
Replace mower drive belt.
33
Loading ...
Loading ...
Loading ...