DCS-7110 User Manual

Loading ...

57D-Link DCS-7110 User Manual

Conguration

Event Settings

This section explains how to congure the camera to respond to particular

situations (event). A typical application is that when a motion is detected, the

camera sends buered images to an FTP server or e-mail address as notications.

Sever Settings

Click Add Server on Event Settings page to open the Server Setting page. On this

page, you can specify where the notication messages are sent when a trigger is

activated. A total of 5 server settings can be congured.

Server name: Enter a name for the server setting.

• Server Type: There are four choices of server types available: E-mail, FTP, HTTP,

and Network storage. Select the item to display the detailed conguration

options. You can congure either one or all of them.

E-mail: Select to send the media les via e-mail when a trigger is activated.

• Sender e-mail address: Enter the e-mail address of the sender.

• Recipient e-mail address: Enter the e-mail address of the recipient.

• Server address: Enter the domain name or IP address of the e-mail server.

• User name: Enter the user name of the e-mail account if necessary.

• Password: Enter the password of the e-mail account if necessary.

• Server port: The default mail server port is set to 25. You can also manually set

another port.

If your SMTP server requires a secure connection (SSL), select This server requires a

secure connection (SSL).

To verify if the e-mail settings are correctly congured, click Test. The result will be

shown in a pop-up window. If successful, you will also receive an e-mail indicating

the result.

Click Save to enable the settings, then click Close to exit the page.

FTP: Select to send the media les to an FTP server when a trigger is activated.

• Server address: Enter the domain name or IP address of the FTP server.

Loading ...

D-Link DCS-7110 HD Outdoor Day/Night Network Camera