Loading ...
Loading ...
Loading ...
38D-Link DCS-7110 User Manual
Conguration
Day and Night Settings
Switch to B/W in Night Mode: Select to automatically enable the camera to switch
to B/W night mode.
IR Cut Filter: The IR-Cut Removable (ICR) lter mechanically switches between two
dierent sensor lters. It provides the best light conditions both during the day and
night. The following options are:
• Auto Mode: The camera automatically switches between day and night mode
by judging the level of ambient light. This mode is accessible only when the
exposure mode is set to Auto.
• Day Mode: In this mode the camera switches on the IR cut lter at all times,
which will block the infrared light from reaching the sensor so that the colors
are not distorted.
• Night Mode: The camera switches o the IR cut lter to allow the infrared
light to pass through. This helps the camera to see more clearly in low light
conditions.
• Synchronize with Digital Input: The camera automatically removes the IR cut
lter when DI triggers.
• Schedule Mode: The camera switches between day and night mode based on
a specic schedule. Ensure to enter the starting and ending time for the day
mode. Note that the time format is [hh:mm] and is expressed in 24-hour clock
time. By default, the starting time and ending time of day mode are set to 07:00
and 18:00.
Light Sensor Sensitivity: Select Low, Normal, or High sensitivity for the light sensor.
Disable IR LED: Select this box to disable the IR LED. The IR LED automatically
switches on at night. By default the LED automatically switches on at night.
Loading ...
Loading ...
Loading ...