Hisense HBE3501CPS 5.8 cu. ft. Freestanding Electric Oven

User Manual - Page 20

For HBE3501CPS.

PDF File Manual, 40 pages, Read Online | Download pdf file

HBE3501CPS photo
Loading ...
Loading ...
Loading ...
Oven functions
Oven functions include Baking modes: Proof, Pizza, Broil, Bake, Convection Bake, Convection Roast,
Frozen Bake, AirFry, Dehydrate and some Extra modes: Fast Preheat, Crisp Mode, Self Clean, Steam
Clean, Defrost and Warm. All oven functions are activated in two steps:
1. First, press the key for the selected mode. The indicator around it will light up and the indicator
around
will start to flash.
2.
Then, activate the selected mode by pressing the
key. The indicator around the selected
mode and the indicator around will be lit.
Default temperature will be displayed at the top of the display unit.
You can set the temperature using
or key or keypad.
INFORMATION!
All oven functions can be stopped by briefly pressing the
key.
End will display on the screen. The appliance will automatically go
to a standby state after 5 minutes or if you press again.
Cooking Time
You can set Cooking Time by pressing the Cooking Time key, before you activate the function or
while the function is active.
Cooking Time includes duration and delay. You can set it in the next ways.
1. Duration set the duration for the selected oven function.
Position the oven rack(s) and place the food in the oven.
Select desired baking function.
Press the Cooking Time key.
Set desired duration and touch
or Cooking Time key to
confirm the setting.
When the set duration expires, the oven function is switched
off.
2. Delay Time use this option when you wish to activate a function after a certain period of time.
Position the oven rack(s) and place the food in the oven.
Select desired baking function.
Press the Cooking Time twice.
Set desired delay (start time).
Touch the
or Cooking Time to confirm the setting.
The oven will begin to bake with selected delay.
Delay can be deactivated by pressing the
and the oven
will immediately start baking.
INFORMATION!
Duration and delay can be used at the same time. The function will start with a set delay and
when the delay expires. Function will start and the duration will be shown.
20
Loading ...
Loading ...
Loading ...