Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
30
Other Useful Information (Cont.)
WARNING!
• For any type of cleaning and maintenance, make sure the washing machine is
disconnected from the mains power supply and the water tap is closed.
• Do not open the pump filter cover during the course of a wash program.
• If you are checking the drain pump after a hot water wash, take particular care
as any residual water in the machine may be hot. Wait until the water has cooled
down to avoid burns.
Drain pump maintenance
In order to avoid blockages created by excess lint, threads or items such as bobby
pins, coins, etc., check the drain pump filter regularly, especially if the machine fails to
drain the water or spin properly, or if you notice any unusual noises during the drain or
spin cycles. We recommend you clean the filter every two months, or when there is a
fault and the error code [ E03 ] is displayed on the screen.
CAUTION: If you are checking the drain pump after a hot water wash, wait until any
residual water has cooled to a safe level.
1. Open the lower cover using a screwdriver (Fig. 19).
2. Place a container underneath the drain pump filter when removing it, and always
keep a rag nearby to dry up any water spillage.
3. Remove the plug. Any residual water will drain out (Fig. 20).
4. Remove any foreign objects. Clean the filter carefully with water and a soft brush
(Fig. 21).
5. Screw the filter plug back into position.
6. Close the pump filter cover and secure it with the screw.
WARNING!
Make sure to reinstall the drain pump filter and close the cover panel securely,
otherwise water may leak.
Fig. 19 Fig. 20
Fig. 21
Loading ...
Loading ...