Loading ...
Loading ...
Loading ...
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
23
Instructions (Cont.)
Step-by-step washing instructions
1. Connect: Plug the machine in, switch on power to the outlet and open the water tap.
2. Load: Open the door of the washer and load the machine following the guidelines
on the previous page.
Mixing both large and small items gives better wash results and also helps
distribute the load evenly during spinning. You will achieve the most efficient energy
and water use when washing a full load. However, do not overload the machine as
this causes creases and reduces cleaning efficiency.
When your washing is properly loaded in the machine, close the door and ensure
that no items are caught in the door (Fig. 12).
3. Add detergent: Pull out the detergent dispenser and add detergent as required,
then close the dispenser (see page 20 for instructions).
4. Select a program: Rotate the Program dial to switch on the washing machine
and select the required program. Always check your clothing labels for
recommended wash and care instructions (see page 26).
5. Start: Press the Start/Pause button.
6. Finish: At the end of the wash program, the buzzer will sound to alert you that
the program has finished. The machine will change into standby mode after
10 minutes of inactivity. Turn the dial back to the [ O ] position. Unplug the washing
machine from the power supply and close the water tap.
7. Unload: Open the door and unload the washing machine. We recommend you
leave the door slightly ajar so the drum can dry properly and to prevent mould
and odour development.
Fig. 12
Loading ...
Loading ...
Loading ...