Loading ...
Loading ...
Loading ...
6
ASSEMBLY INSTRUCTIONS
Hardware Used
AA
BB
Hardware Used
1
2
3
TT
1. Attach wheel kit (N) assembly to base (M). Line up
holes in wheel bracket with corresponding holes in base,
insert two bolts M8 x 16 (BB) through holes, and finger
tighten two M8 flange nuts (AA). Be sure that the wheel
assembly is parallel to the base, and fully tighten bolts.
To improve the stability, bucket must be filled with sand.
2. Put the cylinder housing (I) above the base, secure
them with 4pcs M8X16 bolt.
3. Put the post (H) on the top of the cylinder housing,
secure them with 4pcs M6X10 bolt (CC). And then put
the deck ring (LL) through the post and on the top of the
cylinder housing.
x 2
Bolt M8 x 16
M8 Flange nut
x 2
BB
Bolt M8 x 16
x 4
Hardware Used
CC
Bolt M6 x 10
x 4
CC
H
LL
I
M
AA
BB
BB
N
Fill sand
LL
x 1
Deck ring
Loading ...
Loading ...
Loading ...