Loading ...
Loading ...
Loading ...
Your cleaning system requires some assembIy and is ready
for use only after it has been properiy serviced with the
recommended oil and fuel.
Jfyou have any prohmemswith the assembly of your
pressurewasher, please call the pressurewasher hempline
at 1o800o222o3136.
UNPACKTHE PRESSUREWASHER
1. Remove everything from carton except pressure washer.
2. Opencarton completely by cutting each corner from top
to bottom.
3. Remove pressure washer from carton.
CARTONCONTENTS
Checkali contents, if any parts are missing or damaged, call
the pressure washer hetpline at 1=800=222=3136.
° Main Unit
* Handlewith 6ieaning TankAssembly
o Accessory Tray
° High PressureHose
* Spray Gun
o NozzleExtensionwith Quick Connect Fitting
, HydroFoamTM Wash
° Oil Bottle
o Parts Bag (which includes the following):
o Operator's Manual
, Owner's Registration Card
, Safety Goggies
, DetergentSiphoning Hose/Filter
, Bagcontaining 3 multi-coiored ProjectPro@Nozzles
° HydroFoamTM Launcher
o HydroFoamTM Launcher & Wash Instruction Sheet
° FreshStart Fuel Cartridge
* HandleFasteningHardwareKit (whichincludes):
° Carriage Bolts (2)
° Plastic Knobs (2)
° Tree Clips (4)
Becomefamiiiar with each piece before assembling the
pressure washer. Identify ali contents with the iiiustration on
page 6. if any parts are missing or damaged, call the
pressure washer helpline at 1=888=222=3136.
ASSEMBLINGCLEANINGSYSTEM
Your Craftsman cJeaning system wJJJ need assembJy before
operation:
1. Fiii out and send in registration card.
2. Attach handleand accessory tray.
3. Connect detergent siphon hose to pump.
4. Add oii to engine crankcase.
5. Add fuel to fuel tank.
6. Connect pressure hose to spray gun and pump.
7. Connectwater supply to pump.
8. Attach nozzleextension to spray gun.
9. Select/attachquick connect ProjectPro@nozzleto nozzle
extension.
Attach Handle and Aecesse_ Tray
1. Placehandle (A) onto handle supports (B) connected to
main unit. Make sure holes (C) in handle align with holes
(C) on handle supports.
NOTE:It may be necessaryto move the handle supports
from side to side in order to align the handie so it wiii slide
over the handiesupports.
2. Insert carriage boits (A) through holes from outside of
unit and attach a plastic knob (B) from inside of unit.
Tighten by hand.
3. Piaceaccessory tray (A) over hobs (C) on handle
(viewing from front of unit). Push the tree clips (B) into
the holes untii they sit fiat against the accessory tray.
/
/
Insert multi-colored ProjectPro@nozzlesand other
supplied accessories in spaces provided in accessory
tray. SeeHow to Use Accessory Tray.
Loading ...
Loading ...
Loading ...